SpritesMind.Net

1. How can DAC samples be played at the correct speed/timing?
2. Are the DAC samples signed or unsigned?
3. Should music sequence data be copied to the Z80 RAM or read by banking when the playback is controlled by the Z80?
4. Does anyone know the sample rate of the Z80 sound driver found with the SGCC demos?

1. Count cycles and have same figure between 2 sample writes.
For PAL : CyclesBetweenSamples = (53203424 / 15) / SampleRate
2. Unsigned 8bit
3. You can read all from ROM but beware of DMA, it halts Z80 for the duration of it. Combination of both is suggested, buffer pieces into RAM so you can use them while ROM is off limits from DMA.