The equalizer is Priboi E014S, amplifier is Amfiton Y-101-1 and speakers are Amfiton 50AS022. The amplifier has custom end-amps inside as original ones fried all the time :/
TmEE co.(TM) wrote:My Russian speaking ability sucks...
The equalizer is Priboi E014S, amplifier is Amfiton Y-101-1 and speakers are Amfiton 50AS022. The amplifier has custom end-amps inside as original ones fried all the time :/
ya nye govoryu po Russkii otzen horoshoo
Ah, I see... I was wrong about speakers, but amplifier yes - it schematic is very stupid. It always fried. I have same EQ. You don't speak on russian well but understand it, right?
We are going off-topic, but "Бриг У-001" and "Estonia" speakers can be found at my parent's house, working fine. Used them extensively while was still living with them.
My russian skills are also similar, can understand a bit, read 5 words per minute in cyrillic, but not speak, except really simple things..
I had bad Russian teacher, I got "5" for knowing nothing, and thus I didn't learn too much... I can read and write in Cyrillic pretty well. I understand too little what I'm reading... I can talk, but not too well... I don't get into too much trouble when I got to one store which sells Russian pirate MD carts, I just say "Ya hatshu kupit -insert cart name here-" and the seller understands it enough Numbers aren't too much of a problem either, the person just has to talk slow enough for me (man can Russians speak fast ).
I've heard "Estonia" HiFi is good (no experience with them). Soviet time HiFi equipment is great for the most part (if you don't count stuff that always fries ).
Yeah, "Estonia УП-010" and "Estonia УМ-010" (preliminary amplifier and power amplifier, 50 nominal watts per channel on 8 ohm load) have awesome quality of sound.
OK, end of off-topic.
What can anyone say about this ? I know the carts it uses are different and use a flash chip (which I hope you can reprogram)... I can buy one locally...
My Russian sucks badly, but I read something about programmators, and if I'm not wrong the carts can be re-flashed... the flashes seem 3.3V...
How is the compatibility, are there (m)any games that don't run, or run poorly ? I once bought a Magistr 2(the mini variant) and half of my games did not run on it, at least its cartslot had all signals present, my EEPROM mapper worked perfectly