Pokemon Red or Blue ROM

Announce (tech) demos or games releases

Moderator: Mask of Destiny

Post Reply
jeanetti
Newbie
Posts: 2
Joined: Tue Nov 03, 2009 5:07 am

Pokemon Red or Blue ROM

Post by jeanetti » Mon Dec 28, 2009 11:31 am

How do i get all 3 starter pokemon in a Pokemon Red or Blue ROM? How can I get all 3 starter pokemon in a Pokemon Red or Blue ROM? Do I have to link emulators? If so, can someone tell me how to? I can only use 1 computer at the moment, but I have a PENDRIVE!
_________________
yahoo keyword tool ~ overture ~ traffic estimator ~ adwords traffic estimator
Last edited by jeanetti on Wed Dec 30, 2009 9:40 am, edited 1 time in total.

Flygon
Very interested
Posts: 60
Joined: Mon Sep 28, 2009 11:26 am
Contact:

Post by Flygon » Mon Dec 28, 2009 12:56 pm

Uh... kid... you've asked completely the wrong forum for that help. :?

As helpful as my name may sound, I wouldn't be able to help on the subject nor think it'd be exactly appropriate.

bastien
Very interested
Posts: 208
Joined: Mon Jun 25, 2007 7:19 pm
Location: Besançon,France
Contact:

Post by bastien » Tue Dec 29, 2009 11:11 am

uh ? you have a pokemon blue/red rom for Sega Genesis ?

Flygon
Very interested
Posts: 60
Joined: Mon Sep 28, 2009 11:26 am
Contact:

Post by Flygon » Wed Dec 30, 2009 9:56 am

It could always be that emulator on the 32x. :wink:

bastien
Very interested
Posts: 208
Joined: Mon Jun 25, 2007 7:19 pm
Location: Besançon,France
Contact:

Post by bastien » Wed Dec 30, 2009 2:55 pm

yes but i don"t think it's playable with it .
Only mapper 1 roms can be launched with the 32x Gameboy emulator :wink:

mic_
Very interested
Posts: 265
Joined: Tue Aug 12, 2008 12:26 pm
Location: Sweden
Contact:

Post by mic_ » Wed Dec 30, 2009 3:20 pm

Really? I thought I had MBC3 support in there as well, but maybe I remember it wrong.

bastien
Very interested
Posts: 208
Joined: Mon Jun 25, 2007 7:19 pm
Location: Besançon,France
Contact:

Post by bastien » Wed Dec 30, 2009 4:18 pm

as far as i remember you have in your topic that only the MBC1 working .
mic_ wrote:You can get all the code in its current state here. You'll need the GNU binutils for SH and M68k to build it. Add whatever ROMs you want to roms.s, but there's no GUI yet so it'll only load the first ROM in the table.

Known issues:

* Speed, obviously.
* Joypad emulation is buggy.
* The SBC instruction sets the flags incorrectly (at least H, possibly C).
* ..so do a few others, like ADD SP,n.
* Scrolling sometimes occurs on the wrong scanline since CPU emulation and PPU emulation are run in parallel, and are allowed to get out of sync by up to about 450 cycles (GB CPU cycles, that is).
* It assumes that every ROM uses MBC1, so only ROMs using MCB1 (or no memory bank controller at all) will work.
but it's awesome ! maybe another release
i Hope :D

Post Reply