YM2612 write/read/register select
Moderator: BigEvilCorporation
-
- Very interested
- Posts: 66
- Joined: Fri Oct 15, 2010 7:06 am
- Location: Vancouver, Canada
- Contact:
my code is whoa nasty now, it's a full-on VGM player and MIDI synthesizer that alters registers based on midi control codes so it might not be too useful to you anymore. I also had a power supply failure that took down my file server so those links will be dead until I get it back in order.
I think I can pastebin it or something though, let me see. I've had my own webserver for so long I don't know how to share files anymore
I think I can pastebin it or something though, let me see. I've had my own webserver for so long I don't know how to share files anymore
-
- Very interested
- Posts: 66
- Joined: Fri Oct 15, 2010 7:06 am
- Location: Vancouver, Canada
- Contact:
Don't worry I'm used to digging through whoa nasty codebases to find what I'm looking for, I have a number of them myself . Besides, I'm looking to do something similar myself, I wanna drive the chip from my VST! So anything you have on MIDI support would be hella useful.
On a never ending quest to compose for the Genesis/Megadrive
Try http://depositfiles.com/files/3s7w4dyks for now. I'm in #spoon on irc.quakenet.org if you want to ask anything, but I might be afk. I'm doing midi semi-wrong (a big case statement instead of callbacks)
edit: oh, also, this uses two YM2612s, hence the 12 channels. It keeps the data bus for the ym2612 it's not currently writing to in high-impedance mode by using |CS properly like Charles McDonald told me about early in the thread.
edit: oh, also, this uses two YM2612s, hence the 12 channels. It keeps the data bus for the ym2612 it's not currently writing to in high-impedance mode by using |CS properly like Charles McDonald told me about early in the thread.