Page 7 of 12
Posted: Wed Nov 12, 2014 10:58 am
by MintyTheCat
I will not support this site any longer due to site censorship.
Posted: Wed Nov 19, 2014 10:29 am
by Oerg866
Well, may I suggest that you use the PCBA Consultation service from iteadstudio.com?
They manufacture boards rather cheaply, and the PCBA consultation service based on gerberfiles and a BOM will respond quickly with a quote for fully assembled boards (yes, with parts on it) in the quantity you specify.
Cheers
Eric
Posted: Wed Nov 19, 2014 12:07 pm
by SoullessSentinel
Oerg866 wrote:Well, may I suggest that you use the PCBA Consultation service from iteadstudio.com?
They manufacture boards rather cheaply, and the PCBA consultation service based on gerberfiles and a BOM will respond quickly with a quote for fully assembled boards (yes, with parts on it) in the quantity you specify.
Cheers
Eric
This looks like a great service, definitely useful in my own projects, thanks for the link.
Posted: Wed Nov 19, 2014 12:38 pm
by Oerg866
I got 10 two layer boards for my GCVGA project for about $12 + shipping.
Can't beat that, really
Posted: Sun Nov 23, 2014 4:52 pm
by MintyTheCat
I will not support this site any longer due to site censorship.
Posted: Sun Nov 23, 2014 8:27 pm
by Oerg866
Hooray!!!
Posted: Sun Nov 23, 2014 8:42 pm
by MintyTheCat
I will not support this site any longer due to site censorship.
Posted: Sun Nov 23, 2014 11:04 pm
by Chilly Willy
Sounds good... can I still get in on this? Hands are too stiff to do the solder work anymore, and I do like the idea of a completely open source FPGA cart.
Posted: Mon Nov 24, 2014 11:01 am
by MintyTheCat
I will not support this site any longer due to site censorship.
Posted: Mon Nov 24, 2014 4:20 pm
by notaz
If you get another free spot you can post here, I (or someone else) may consider taking it.
Posted: Tue Nov 25, 2014 1:11 am
by Chilly Willy
MintyTheCat wrote:Chilly Willy wrote:Sounds good... can I still get in on this? Hands are too stiff to do the solder work anymore, and I do like the idea of a completely open source FPGA cart.
I think that the orders for the first batch are at 19 out of 20 so you should be able to have the last one of that batch.
If there is interest enough then another batch can be made.
Cheers,
Minty.
Thanks. Can't have too many of these dev carts.
Posted: Wed Nov 26, 2014 10:23 am
by nitrinho
Hello, I'm afraid i've arrived too late for the first batch, but I'm interested in one of them.
I can provide you my address in PM when the second batch is planned.
Posted: Wed Nov 26, 2014 11:08 am
by MintyTheCat
I will not support this site any longer due to site censorship.
Posted: Mon Jan 12, 2015 5:51 pm
by Oerg866
*yawn* :/
Posted: Wed Jan 14, 2015 4:19 pm
by MintyTheCat
I will not support this site any longer due to site censorship.