Page 1 of 1

Sega Loader with Back port

Posted: Sun Jun 24, 2007 2:03 am
by evildragon
I was wondering, can the Sega Loader be modified to use the back port on my model 1 Genny?

Also, is the pinout exactly the same, just a gender change, or was the pinout reversed on the back port?

Posted: Sun Jun 24, 2007 4:09 am
by 8bitwizard
If it uses one of the front ports, all you need to do is change the port address.

All three ports are EXACTLY the same, except that the rear EXT port is a female jack instead of a male jack. (except on mine where I had to install the parts in the empty holes, so I used a male jack)