Hi there,
I know it may sound dumb but my goal is to get my genny near my PC when I dev, to make full test not only through emulator.
So, do you think I could connect my Genny to a Rearview Monitor screen for Car Backup Camera like this one :
http://www.amazon.com/Rearview-Monitor- ... 66&sr=1-24
I plan to get a 7" version but it'll be the same.
What bugs me is the resolution => 480(H) x RGB x 272(V)
272 won't be enought right ?
Connect to a rear view TFT Screen
-
- Very interested
- Posts: 2440
- Joined: Tue Dec 05, 2006 1:37 pm
- Location: Estonia, Rapla City
- Contact:
In both cases the image is interpolated to fit screen, also deinterlaced.
The controller assumes 480i or 576i input, even though it receives 240p or 288p. There won't be any pixel lining up.
The controller assumes 480i or 576i input, even though it receives 240p or 288p. There won't be any pixel lining up.
Mida sa loed ? Nagunii aru ei saa
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
-
- Very interested
- Posts: 2440
- Joined: Tue Dec 05, 2006 1:37 pm
- Location: Estonia, Rapla City
- Contact:
LCD based mini TV does exactly the same stunts as the parking screen. But the screen res may be higher so it can look better.
Mida sa loed ? Nagunii aru ei saa
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
-
- Very interested
- Posts: 484
- Joined: Sat Mar 05, 2011 11:11 pm
- Location: Berlin, Germany
Re: Connect to a rear view TFT Screen
That is a good way to do it. I use GENS-KMod and MESS for Emu stuff then have UMDK for hardware it is a good way to do it.KanedaFr wrote:Hi there,
I know it may sound dumb but my goal is to get my genny near my PC when I dev, to make full test not only through emulator.
So, do you think I could connect my Genny to a Rearview Monitor screen for Car Backup Camera like this one :
http://www.amazon.com/Rearview-Monitor- ... 66&sr=1-24
I plan to get a 7" version but it'll be the same.
What bugs me is the resolution => 480(H) x RGB x 272(V)
272 won't be enought right ?
I am using a VGA-Upscaler connected to a VGA CRT Monitor for most of my MD development incidentally.
Good luck with it, kaneda.
UMDK Fanboy