Hello,
I'm a little lost....
I was working on MVST and saw it used chan1,2,5,6 of the ym2612
so I modified it to use chan 0,1,4,5
It works great on the Genny BUT not on MVST
To understand, you must know MVST is neogeo based, so I used a ym2610
it seems channels are differents...
can you confirm it ?
I'm on the way to write a MVST code and a Genny code...just what I wanted to avoid...
ym2612 vs ym2610
Moderator: BigEvilCorporation
ok...forget it...I find my answer...
http://www.ylw.mmtr.or.jp/~hosino/ma-ne ... 2610am.txt
perhaps I read to fast but MAME source specify ym2610 as a 6chan sound chip
So I was asking something stupid.....
cya
http://www.ylw.mmtr.or.jp/~hosino/ma-ne ... 2610am.txt
perhaps I read to fast but MAME source specify ym2610 as a 6chan sound chip
So I was asking something stupid.....
cya
-
- Very interested
- Posts: 292
- Joined: Sat Apr 21, 2007 1:14 am
It's a little confusing:
YM2610 has 4 channels FM, 3 channels SSG, and 2 types of ADPCM
YM2610B has 6 channels FM, 3 channels SSG, and 2 types of ADPCM
YM2612 has 6 channels FM, no SSG, no ADPCM (but a DAC instead)
You can still apply SSG-type envelopes to the FM channels on the YM2612. The Neo*Geo uses the old YM2610 with only 4 channels.
YM2610 has 4 channels FM, 3 channels SSG, and 2 types of ADPCM
YM2610B has 6 channels FM, 3 channels SSG, and 2 types of ADPCM
YM2612 has 6 channels FM, no SSG, no ADPCM (but a DAC instead)
You can still apply SSG-type envelopes to the FM channels on the YM2612. The Neo*Geo uses the old YM2610 with only 4 channels.