Everdrive-MD Flash Cart

notaz · Post by **notaz** » Fri Dec 31, 2010 2:21 pm

HardWareMan wrote: 10. 6MBytes ROM support (for example Kabal UMK3 hack)!

Hmh, doesn't that mean it always responds above 400000, what could cause problems with SegaCD?

Chilly Willy · Post by **Chilly Willy** » Fri Dec 31, 2010 6:23 pm

If you look at the docs for the hardware (he does post those along with much of the source for the OS and drivers), it's not ALWAYS responding that way, but only when in certain operating modes.

KRIKzz · Post by **KRIKzz** » Sat Jan 01, 2011 3:44 am

notaz wrote:
HardWareMan wrote: 10. 6MBytes ROM support (for example Kabal UMK3 hack)!
Hmh, doesn't that mean it always responds above 400000, what could cause problems with SegaCD?

there is no any problems with CD unit because looks like this cart just have not any features for mega cd (!CART wire just shorted to GND)

notaz · Post by **notaz** » Mon Jan 03, 2011 12:14 pm

Chilly Willy wrote:If you look at the docs for the hardware (he does post those along with much of the source for the OS and drivers), it's not ALWAYS responding that way, but only when in certain operating modes.

Sounds good then.
Edit: where are the docs, only given when you buy it?

KRIKzz wrote: there is no any problems with CD unit because looks like this cart just have not any features for mega cd (!CART wire just shorted to GND)

Be aware that CD hardware is accessible at 400000-7fffff when !CART is grounded.

ElBarto · Post by **ElBarto** » Mon Jan 03, 2011 4:04 pm

Best way is to test Flux.

Chilly Willy · Post by **Chilly Willy** » Mon Jan 03, 2011 7:04 pm

notaz wrote: Edit: where are the docs, only given when you buy it?

They're on his web site, and anyone can download them.

http://krikzz.com/pub/support/everdrive ... ec-1.1.doc

If you look at the Everdrive-MD page, you'll find that link and many more.

http://krikzz.com/everdrive-md.html

notaz · Post by **notaz** » Tue Jan 04, 2011 12:16 pm

I was talking about Masyanaya's new cart HardWareMan posted about.

According KRIKzz doc his hardware also stopped touching 400000-7fffff in later firmwares, because of CD I assume.

Chilly Willy · Post by **Chilly Willy** » Tue Jan 04, 2011 7:24 pm

Sorry, it wasn't clear seeing as you asked for them in the middle of my talking about the Everdrive-MD.

But yes, I'd like to see some info on the other cart, too. Feature lists are usually not a great source of info.

HardWareMan · Post by **HardWareMan** » Wed Jan 05, 2011 5:23 am

notaz wrote:I was talking about Masyanaya's new cart HardWareMan posted about.

This card support 6 different memory maps. I assume that 5 standard in 4MByte area (with or without SRAM/EEPROM) and one in extra area $400000+. I already requested programmers manual for hardware, when I get it, I will check this info.

Post by **KanedaFr** » Mon Mar 21, 2011 3:07 pm

For people looking for information how to update/patch/xxx your everdrive, this guy from Japanseems to use it a lot !