How do i get all 3 starter pokemon in a Pokemon Red or Blue ROM? How can I get all 3 starter pokemon in a Pokemon Red or Blue ROM? Do I have to link emulators? If so, can someone tell me how to? I can only use 1 computer at the moment, but I have a PENDRIVE!
_________________
yahoo keyword tool ~ overture ~ traffic estimator ~ adwords traffic estimator
Pokemon Red or Blue ROM
Moderator: Mask of Destiny
Pokemon Red or Blue ROM
Last edited by jeanetti on Wed Dec 30, 2009 9:40 am, edited 1 time in total.
-
- Very interested
- Posts: 208
- Joined: Mon Jun 25, 2007 7:19 pm
- Location: Besançon,France
- Contact:
as far as i remember you have in your topic that only the MBC1 working .
i Hope
but it's awesome ! maybe another releasemic_ wrote:You can get all the code in its current state here. You'll need the GNU binutils for SH and M68k to build it. Add whatever ROMs you want to roms.s, but there's no GUI yet so it'll only load the first ROM in the table.
Known issues:
* Speed, obviously.
* Joypad emulation is buggy.
* The SBC instruction sets the flags incorrectly (at least H, possibly C).
* ..so do a few others, like ADD SP,n.
* Scrolling sometimes occurs on the wrong scanline since CPU emulation and PPU emulation are run in parallel, and are allowed to get out of sync by up to about 450 cycles (GB CPU cycles, that is).
* It assumes that every ROM uses MBC1, so only ROMs using MCB1 (or no memory bank controller at all) will work.
i Hope