Small Hardware Problem with 32x/MegaDrive1/MegaCD2 Bundle
Posted: Sun Feb 04, 2007 9:50 pm
OK, I know this is a development only board, but I am sure you can help me here. I have one of these older MegaDrive 1 with its typical Mono Sound.
I know that the Mixing Cable lets the Mega CD 2 output Stereo Sound over the Chinch plugs on the back. SO I need to build a new cable for Stereo Sound on my TV to get stereo sound.
My question is: The 32x gets all output from the MegaDrive first, then puts it out to the TV. Does the 32x send Audio to the MegaDrive or renders it itself and mixes it into the Sound coming from the MegaDrive? SO do I need to add the Sound from the MegaCD Chinch before or after the 32x? After would be way easier (solder directly into the SCART plug is easier), thats why I ask.....
Normally I would say, screw the Model 1 and buy a Model 2, but I made so many mods on it, I will never replace it (Added a 68010 CPU, added Jap/US 50/60 Hz Switches etc)
P.S. Someone here has a Mega CD 2 MegaDrive Model 1 Adapter (Enlarger) and the metal shielding the MegaDrive stands onto he can sell to me?
I know that the Mixing Cable lets the Mega CD 2 output Stereo Sound over the Chinch plugs on the back. SO I need to build a new cable for Stereo Sound on my TV to get stereo sound.
My question is: The 32x gets all output from the MegaDrive first, then puts it out to the TV. Does the 32x send Audio to the MegaDrive or renders it itself and mixes it into the Sound coming from the MegaDrive? SO do I need to add the Sound from the MegaCD Chinch before or after the 32x? After would be way easier (solder directly into the SCART plug is easier), thats why I ask.....
Normally I would say, screw the Model 1 and buy a Model 2, but I made so many mods on it, I will never replace it (Added a 68010 CPU, added Jap/US 50/60 Hz Switches etc)
P.S. Someone here has a Mega CD 2 MegaDrive Model 1 Adapter (Enlarger) and the metal shielding the MegaDrive stands onto he can sell to me?