Cartridge Reproduction

For anything related to cart (SRAM, SF2 mapper, audio, CD mode 1, ...)

Moderator: BigEvilCorporation

Post Reply
Munkyears
Very interested
Posts: 54
Joined: Sat Mar 21, 2009 4:24 pm
Location: Sheffield, England

Cartridge Reproduction

Post by Munkyears » Tue Apr 28, 2009 7:06 pm

Anyone who wants to publish their ROM can using gamereproductions.com

for $7.50 you can have your ROM or a licensed ROM (I dont know where the law comes on this but...) burnt to a cart and even upload or send them a logo for the front of the cart

You can have 1 or 2 2mb eeproms for next to nothing
take a look

http://www.gamereproductions.com/produc ... -chip).htm

Regards

Joe
To be this good takes ages, To be this good takes Stef, Kanedafr, ChillyWilly & everyone who has helped me discover what hardwork is!

Dive into the SpritesMind! :)

Chilly Willy
Very interested
Posts: 2984
Joined: Fri Aug 17, 2007 9:33 pm

Post by Chilly Willy » Tue Apr 28, 2009 7:55 pm

That doesn't burn a cart, it burns an EPROM to put INTO your own cart (not provided). Also, look at the size: 2 mb... in other words, 256 KB (per chip).

Munkyears
Very interested
Posts: 54
Joined: Sat Mar 21, 2009 4:24 pm
Location: Sheffield, England

Post by Munkyears » Fri May 01, 2009 3:13 pm

Ah my mistake thanks for the correction.

how big would these EEPROMS be ? as big as the ones in the full megadrive carts?

if i used it, would the PCB have to fit in an extended cartridge like Skitchin'
or jungle strike. they are considerably bigger than say sonic 2 for example

Many thanks
To be this good takes ages, To be this good takes Stef, Kanedafr, ChillyWilly & everyone who has helped me discover what hardwork is!

Dive into the SpritesMind! :)

Post Reply