Genesis cartridge

For anything related to cart (SRAM, SF2 mapper, audio, CD mode 1, ...)

Moderator: BigEvilCorporation

Post Reply
cdoty
Very interested
Posts: 117
Joined: Wed Nov 29, 2006 2:54 pm
Location: Houston, TX
Contact:

Genesis cartridge

Post by cdoty » Wed May 07, 2014 7:02 am

Does anything like this exist for the Genesis?

http://www.infiniteneslives.com/products.php

It would be nice, for development, to have a cartridge designed to run one game that could be flashed using USB.

I did find this, but I don't think it's been released:

http://www.batslyadams.com/2013/12/genn ... carts.html

Pascal
Very interested
Posts: 200
Joined: Wed Nov 29, 2006 11:29 am
Location: Belgium
Contact:

Post by Pascal » Wed May 07, 2014 12:40 pm

unfortunatly, i'm not aware of any project like that for the genesis/md :s

MintyTheCat
Very interested
Posts: 484
Joined: Sat Mar 05, 2011 11:11 pm
Location: Berlin, Germany

Re: Genesis cartridge

Post by MintyTheCat » Wed May 07, 2014 1:11 pm

cdoty wrote:Does anything like this exist for the Genesis?

http://www.infiniteneslives.com/products.php

It would be nice, for development, to have a cartridge designed to run one game that could be flashed using USB.

I did find this, but I don't think it's been released:

http://www.batslyadams.com/2013/12/genn ... carts.html
Hi,

UMDK can be used as you would a Flashcart and it is very fast over USB:

http://www.makestuff.eu/wordpress/categ ... ts/umdkv2/

It has many other features too and most notably the ability to trace the execution of the Machine.

I am working on this myself and give my full support to the Author - Prophet.

elusive
Very interested
Posts: 57
Joined: Fri Jan 27, 2012 12:03 am

Post by elusive » Fri May 09, 2014 7:34 pm

I'm working with a friend on another forum to get 2mb flash rom boards with SRAM made, and have a custom programming adapter for them. Unfortunately it will require an actual programmer.

I also have pcbs that support 2 and 4 MB EPROMs that don't require rewiring, so if you have a 42 pin socket and EPROM programmer and eraser, I could offer you that, but I'm assuming since you're asking about something similar to the INL boards and kazoo, you probably don't, right?

Post Reply