Code: Select all
000000: [channel 1] [operator 3] TL = 16
000000: [channel 1] key off
000000: [channel 1] [operator 3] TL = 8
000000: [channel 1] [operator 3] TL = 29
000000(1FD6): [channel 1] key off
000000(1FD9): [channel 1] key off
000000: [channel 1] frequency = 16 Hz
035037(548C): [channel 1] key off
035045: [channel 1] frequency = 164 Hz
035048: [channel 1] key on (mi3)
So as you can see, operator 3 TL is changed twice while the key is set off, frequency is also changed while key off.
Is there a reason for such a thing or can I assume this disassembling is equivalent to this one :
Code: Select all
000000: [channel 1] [operator 3] TL = 29
000000(1FD6): [channel 1] key off
035045: [channel 1] frequency = 164 Hz
035048: [channel 1] key on (mi3)
Also, do have 2 consecutive key-off commands an effect that only one key-off has not ?