UMDK Manufacture: who wants one?

Hosted forum for UMDK related questions

Moderators: BigEvilCorporation, prophet36

Oerg866
Very interested
Posts: 209
Joined: Sat Apr 19, 2008 10:58 am
Location: Frankfurt, Germany
Contact:

Post by Oerg866 » Thu Jan 15, 2015 7:22 am

MintyTheCat wrote:
Oerg866 wrote:*yawn* :/
Thanks for that :D

Voltage-Regulators are on their way.
I have then only to assist the chap who is handling the Hardware manufacture to write the Firmware to the Bootloader, do some testing then we should be good to go.

But I was under the impression that you only wanted a PCB, Oerg866 - have you asked Prophet36 if he has any left?

Cheers,

Minty.
Yeah, but if it's not financially ruining getting an assembled one would be an option :P But you're right, I should ask him.

Cheers!
Eric

User avatar
MintyTheCat
Very interested
Posts: 484
Joined: Sat Mar 05, 2011 11:11 pm
Location: Berlin, Germany

Post by MintyTheCat » Thu Jan 15, 2015 5:04 pm

I will not support this site any longer due to site censorship.
Last edited by MintyTheCat on Thu Apr 09, 2015 12:38 pm, edited 1 time in total.
UMDK Fanboy

pixelperfect
Newbie
Posts: 4
Joined: Sun Jan 04, 2015 5:21 pm

Post by pixelperfect » Sat Jan 17, 2015 2:06 am

MintyTheCat wrote: I will direct you all to the purchase area once we are certain that everything works correctly with the UMDK PCBs.

Cheers,

Minty.
I'll wait for your direction, but you can at least add another interested party to any 2nd batch tallies you may be keeping. Looking to use it for game/demo homebrew work.

edit/PS. Oh and uh, hello Sprites Mind :) Long time lurker, first time poster, shouldn't be the last time. Finally signed up to quite a few retro dev boards I've lurked for years. Lovely community, gleaned a lot from whats already here. Hopefully, in time, I can contribute to the landscape of it. And cheers Minty for putting this production run together and massive thank yous to all the Stefs, Oerg866s, Chilly Willlys, prophet36s of these boards who have made truly great contributions to the retro/Genesis development scene. You guys/gals all amaze and inspire.

User avatar
MintyTheCat
Very interested
Posts: 484
Joined: Sat Mar 05, 2011 11:11 pm
Location: Berlin, Germany

Post by MintyTheCat » Sat Jan 17, 2015 10:32 pm

I will not support this site any longer due to site censorship.
Last edited by MintyTheCat on Thu Apr 09, 2015 12:38 pm, edited 1 time in total.
UMDK Fanboy

User avatar
prophet36
Very interested
Posts: 234
Joined: Sat Dec 13, 2008 6:58 pm
Location: London, UK
Contact:

Post by prophet36 » Tue Jan 20, 2015 11:29 pm

MintyTheCat wrote:He'll get onto populating soon
Well done for arranging manufacturing, MintyTheCat. Excellent job!

Do you have any idea what the end-user price is likely to be?

If you need help with the initial testing, let me know. I'm happy to help if I can.

Oerg866
Very interested
Posts: 209
Joined: Sat Apr 19, 2008 10:58 am
Location: Frankfurt, Germany
Contact:

Post by Oerg866 » Thu Jan 22, 2015 12:48 pm

f unless you are doing it for the experience at soldering SMT boards.
Well, i do. Not to a level where I could do it practically blindfolded or anything, but it's possible nontheless.

But yeah, Let's see where this goes ;)

Thanks for your efforts!

User avatar
MintyTheCat
Very interested
Posts: 484
Joined: Sat Mar 05, 2011 11:11 pm
Location: Berlin, Germany

Post by MintyTheCat » Thu Jan 22, 2015 5:48 pm

I will not support this site any longer due to site censorship.
Last edited by MintyTheCat on Thu Apr 09, 2015 12:38 pm, edited 1 time in total.
UMDK Fanboy

Oerg866
Very interested
Posts: 209
Joined: Sat Apr 19, 2008 10:58 am
Location: Frankfurt, Germany
Contact:

Post by Oerg866 » Fri Jan 23, 2015 11:18 am

Well, being able to avoid SMT soldering by buying a finished board is better than having to do it, eh? ;)

User avatar
MintyTheCat
Very interested
Posts: 484
Joined: Sat Mar 05, 2011 11:11 pm
Location: Berlin, Germany

Post by MintyTheCat » Fri Jan 23, 2015 1:02 pm

I will not support this site any longer due to site censorship.
Last edited by MintyTheCat on Thu Apr 09, 2015 12:38 pm, edited 1 time in total.
UMDK Fanboy

plee
Very interested
Posts: 65
Joined: Wed Nov 29, 2006 11:32 am
Location: Houston, Texas

Post by plee » Sat Jan 24, 2015 4:08 pm

MintyTheCat wrote:
nitrinho wrote:Hello, I'm afraid i've arrived too late for the first batch, but I'm interested in one of them.
I can provide you my address in PM when the second batch is planned.
Hi,

given that we have 20 orders for the first batch it is highly likely that there will be a second batch.

We need to make 3 as a test and if that all works out then we will proceed with the first batch and make them available for those on the list at first to order.

I will direct you all to the purchase area once we are certain that everything works correctly with the UMDK PCBs.

Cheers,

Minty.
Better late than never, count me in for one.

User avatar
MintyTheCat
Very interested
Posts: 484
Joined: Sat Mar 05, 2011 11:11 pm
Location: Berlin, Germany

Post by MintyTheCat » Sat Jan 24, 2015 4:28 pm

I will not support this site any longer due to site censorship.
Last edited by MintyTheCat on Thu Apr 09, 2015 12:39 pm, edited 1 time in total.
UMDK Fanboy

Gouky
Newbie
Posts: 1
Joined: Fri Jan 23, 2015 4:40 pm
Location: Edinburgh

Post by Gouky » Mon Jan 26, 2015 10:31 am

Hey there,

new on this forum but I would be interested in 1 as well if possible.

At first I intended to try build one myself but I'm not sure that my skills are enough :)

Cheers!

User avatar
MintyTheCat
Very interested
Posts: 484
Joined: Sat Mar 05, 2011 11:11 pm
Location: Berlin, Germany

Post by MintyTheCat » Mon Jan 26, 2015 1:46 pm

I will not support this site any longer due to site censorship.
Last edited by MintyTheCat on Thu Apr 09, 2015 12:39 pm, edited 1 time in total.
UMDK Fanboy

User avatar
Grind
Very interested
Posts: 60
Joined: Fri Jun 13, 2014 1:26 pm
Location: US
Contact:

Post by Grind » Mon Jan 26, 2015 4:14 pm

I'm up for one of these if/when there is a second batch. Letting me touch a soldering iron could be disastrous. :)

User avatar
MintyTheCat
Very interested
Posts: 484
Joined: Sat Mar 05, 2011 11:11 pm
Location: Berlin, Germany

Post by MintyTheCat » Mon Jan 26, 2015 4:15 pm

I will not support this site any longer due to site censorship.
Last edited by MintyTheCat on Thu Apr 09, 2015 12:41 pm, edited 1 time in total.
UMDK Fanboy

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest