SNASM68K trouble... (solved)
Moderator: BigEvilCorporation
-
- Very interested
- Posts: 2440
- Joined: Tue Dec 05, 2006 1:37 pm
- Location: Estonia, Rapla City
- Contact:
SNASM68K trouble... (solved)
No matter what I do I get this !!! And only with CA !!! I checked all the ASM files and these weren't messed up, and the program is not messed up either (I had an HDD issue which caused my some messed up files - BIOS doesn't support HDDs over 139GB and I have 250GB HDD, and a software solution to come over the limit... but Win98SE doesn't use it).
Ignore the last line, it is put there by my time stamp proggy...
Any ideas ?
Last edited by TmEE co.(TM) on Thu Sep 13, 2007 7:43 am, edited 1 time in total.
Mida sa loed ? Nagunii aru ei saa
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
-
- Very interested
- Posts: 326
- Joined: Mon Mar 12, 2007 1:53 am
- Contact:
http://en.wikipedia.org/wiki/Page_fault
welcome to the world of DOS memory management. (told you it was bad)
welcome to the world of DOS memory management. (told you it was bad)
-
- Very interested
- Posts: 2440
- Joined: Tue Dec 05, 2006 1:37 pm
- Location: Estonia, Rapla City
- Contact:
Thing is that when I've got page fault with some other soft, it was caused by too little memory (or crashing the program on purpose), and appeared only once, but in this case it happens whenever I try to assemble... other copies of SNASM68K in other locations of my SMD directory work fine...
Mida sa loed ? Nagunii aru ei saa
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
-
- Very interested
- Posts: 326
- Joined: Mon Mar 12, 2007 1:53 am
- Contact:
-
- Very interested
- Posts: 2440
- Joined: Tue Dec 05, 2006 1:37 pm
- Location: Estonia, Rapla City
- Contact:
After seeing if XP version works (and it gave even bigger error), I started to comment every single line and finally: Problem solved, one graphics file WAS messed up, and it was the problem, now everything assemble perfectly (with both DOS and XP versions of SNASM68K)
Mida sa loed ? Nagunii aru ei saa
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
-
- Very interested
- Posts: 326
- Joined: Mon Mar 12, 2007 1:53 am
- Contact:
-
- Very interested
- Posts: 2984
- Joined: Fri Aug 17, 2007 9:33 pm
SNASM is pretty long in the tooth. It's probably time to retire the old girl.
Use asmx instead. It supports not just the 68000, but also the Z80 and a number of other older CPUs. It also compiles for a number of platforms - I'm using it in 64 bit linux.
http://xi6.com/projects/asmx/
Use asmx instead. It supports not just the 68000, but also the Z80 and a number of other older CPUs. It also compiles for a number of platforms - I'm using it in 64 bit linux.
http://xi6.com/projects/asmx/
-
- Very interested
- Posts: 2440
- Joined: Tue Dec 05, 2006 1:37 pm
- Location: Estonia, Rapla City
- Contact:
I just need a 200K executable which I can copy anywhere for convenient use
Mida sa loed ? Nagunii aru ei saa
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen
http://www.tmeeco.eu
Files of all broken links and images of mine are found here : http://www.tmeeco.eu/FileDen