Page 1 of 1


Posted: Sun Jun 10, 2012 12:43 am
by Graz
It's been ages since I posted... Anyway, I did an RGB mod to one of my model 2 systems and ended up adding a VGA connector to it.


The mod's pretty simple - it's just decoupling capacitors and 75 ohm resistors. In theory, all you need is a VGA cable and a suitable monitor and you're good to go. But, it's almost impossible to find a modern VGA monitor that'll sync to 15Khz. Some TVs with VGA inputs might, but I haven't really tried. To get around this, I've gotten hold of an Extron DVS 204 video scaler (link). This will take pretty much anything in (including S-video, composite, and RGB) and output VGA or component.

This is the rig:


Connecting the regular composite output through it gives this:


However, connecting via the RGB gives this:


This is the same console, the same VGA scaler and the same monitor - only the choice of coupling from the Genesis to the scaler is different. The scaler is upscaling to 1024x768. Unfortunately, the scaler doesn't output the native resolution of my VGA flat panel, so it's getting scaled again. Regardless, it's a pretty major improvement and far better than anything I've seen on a TV.

Close-up (composite):


.. and RGB:


Hooray for RGB.

Posted: Sun Jun 10, 2012 1:42 am
by djcouchycouch
Very nice!

Posted: Sun Jun 10, 2012 1:07 pm
by KanedaFr
I'm actually very interested into this kind of stuff :

with give this

this way I would at last be possible to connect my Genny on my LCD
the only option missing is PIP so I could code and see my game playing at the same time !
I found a VGA box which did this but not scale line...
so 2 solutions, none is perfect :(

for 15KHz monitor, follow this link ... A_Monitors

Posted: Mon Jun 25, 2012 10:34 pm
by Huge
I have a VGA connector added to one of my Saturns. Since I don't have an upscaler, nor a 15khz monitor, I can only use it with two homebrew titles. But hey, it's still pretty cool!

Posted: Tue Jun 26, 2012 8:27 am
by TmEE co.(TM)