SpritesMind.Net

The VPP (12V programming voltage) pin is not on the cart slot, but it could be if you like (use some unused pin). I used a wire for that. I'm working on EPROM stuff as all EPROMs are not programmed the same way. There are lots of Flashes out there, if its industry standard and 5V it can be used with...

I've made a mistake. It was the Z80, and not the DMA (!!!) that was cut from the Genny 3 !!!

Z80 is a MUST component, as almost every game uses it as SFX/BGM engine while 68K does game/GFX therefore it is in Genny 3

Same here !!! You guys rock !!!

It is rough, but it works !!! I dumped most my cartridges, messed with backup RAM on Sonic3 cart and
even BURNED an EPROM !!! Man, EPROMs program easy. I started to write the documentation and some instructions.

On 2nd december is started to build a MD cartridge R/W device whis is 100% designed by me. Today (5th) I got it working correctly, I dumped my Sonic & Knuckles cartridge. It took 45 seconds and the result was a perfect bit accurate copy of the ROM image. If I ASM optimize my QB45 code (I love QB45) ...